Characteristics: Eagle epoxy flooring top coat is highly performance two component polyamine cured epoxy coating solvent free. It has excellent gloss, color retention ,good chemical and solvent resistance.
Recommended Use: Recommended as a top coat. Specify ware house , garages, production area and concrete masonry floor
Physical Characteristics
Finish |
Gloss epoxy solvent free |
Colour |
Grey and standard color |
Solid/volume |
98±2 |
Density of base |
1.5 kg/L |
Viscosity |
100 ku |
Mixing ratio |
3:1 |
Film Thickness Wet film/ dry film thickness |
200 micron / 200 micron |
Pot life |
One hour |
Thinning |
Thinning if necessary, thin up to a maximum Of 7-10% of xylene |
Recommended Coats |
Apply 2 coats |
Theoretical Coverage |
7.5 m²/L |
Gloss @angle 60 |
70-85 |
Surface Preparation: All surface to be clean and dry. Remove all grease, oil, wax, or other material by solvent or detergent washing. Remove all loose, flaking or chalking surfaces. New Construction: Dependent on yard procedures, consult your Eagle Representative.
Application Methods: Method: brush, roller - Mix the hardener with the base well for 10 min. and leave the pails for 10 min. before coated in the floor.
Drying: It take from 12-14 hours to dry depending on the temp. And humidity.
Packing: Base A 9kg - hardener B 3kg
Storage & Shelf-life: Minimum 24 months in closed container. Keep container in a well-ventilated area. Close container after each use. Keep lid tightly closed during storage. Protect from direct sunlight and heat. The applicator should obtain more detailed information from the product label. Health & Safety: Avoid contacts with eyes. Wash hands after use. Please read and observe all precautionary notices on container labels.
DISCLAIMER: The technical data presented in this bulletin are based upon the best available data and practices known to Eagle Paints at the present time. Since Eagle paints is constantly improving its coatings and paint formulas, future technical data may vary somewhat from what was available when this bulletin was printed. Please contact your Eagle Sales Representative for the most up-to date information. Your feedback is important to us. If you have any comments or suggestions regarding our products and services, please share them with us.
Product for application
|