|
Characteristics: Super emultex
putty is a filled based on PVA copolymer binder.
Recommended Use: Recommended as a
putty Specify for exterior drywall, plaster, concrete and masonry.
Physical
Characteristics
|
Finish
|
MATT |
|
Colour
|
White |
|
Solid /valium |
58%
±2 |
|
Density |
1.70 kg/L ± 3 |
|
Viscosity by Brookfield
viscometer |
123 – 127 KU |
|
Film Thickness -
Wet film |
300-600 micron |
|
Thinning
|
------------------- |
|
Recommended Coats |
Apply 2 coats to appropriately prepared substrate
|
|
Theoretical
Coverage |
2.5-3 m²/L |
|
Flash Point
|
---------------- |
Surface Preparation: All surface
to be clean and dry. Remove all grease, oil, wax, or other material by solvent
or detergent washing. Remove all loose, flaking or chalking surfaces. New
Construction: Dependent on yard procedures, consult your Eagle
Representative.
Application Methods: Method:
knife putty
Drying: Dry time is approx.1/2
hour to recoat after 2-3 hours and full cure overnight. The dry time will vary
with temperature and humidity.
Packing: 18kgm Bags - 18kg
cans
Storage & Shelf-life: Minimum
12 months in closed container. Keep container in a well-ventilated area. Close
container after each use. Keep lid tightly closed during storage. Protect from
direct sunlight and heat. The applicator should obtain more detailed information
from the product label.
Health & Safety: Avoid
contacts with eyes. Wash hands after use. Please read and observe all
precautionary notices on container labels.
DISCLAIMER: The technical data
presented in this bulletin are based upon the best available data and practices
known to Eagle Paints at the present time. Since Eagle Paints is constantly
improving its coatings and paint formulas, future technical data may vary
somewhat from what was available when this bulletin was printed. Please contact
your Eagle Sales Representative for the most up-to date information. Your
feedback is important to us. If you have any comments or suggestions regarding
our products and services, please share them with us.
Product for application:
- For interior
- 2 coat of emultex putty or super emultex putty
- One coat of eagle interior primer
- One coat of high emultex emulsion
- 2 coat of super eagle flat or mega emulsion or super eagle silk or eagle
plus
- For exterior
- 2 coat of super emultex putty
- 2 coat of eagle acrylic primer
- 2 coat of eagle acrylic flat or eagle acrylic silk or eagle
heritage
|
