Characteristics: Al neser2000 is alkyd based enamel top coat for interior and exterior used providing a durable high gloss finish with slandered color, good adhesion , with good opacity

Recommended Use: Recommended as a finish coat. Specify for interior drywall, , plaster, concrete masonry and wood.

Physical Characteristics

Finish	Gloss Paint
Colour	White and stander color
Solid/volume	40%
Density	0.93-1.18 kg/L
Viscosity	12 min
Film Thickness Wet film / dry film	120micron / 48 micron
Thinning	If thinning is necessary, thin up to a maximum Of 10% white spirit
RecommendedCoats	Apply 2 coats to appropriately prepared substrate
Theoretical Coverage	8:9 mē/L
Gloss@ 60 degree	More than 80 degree

Surface Preparation: All surface to be clean and dry. Remove all grease, oil, wax, or other material by solvent or detergent washing. Remove all loose, flaking or chalking surfaces. New Construction: Dependent on yard procedures, consult your Eagle Representative.

Application Methods: Method: Brush, roller or spray

Drying: Dry time is approx3-5 hours recoated after 12 hours. The dry time will vary with temperature and humidity.

Packing: (Cans 1/2kg / Box 24 cans) - (Cans 0.7 liter / Box 12 cans) - (Cans 2.25 liter - Box 4 cans) - (Cans 4,25 liter / Box 4 cans) - Pails 15 kg          

Storage & Shelf-life: Minimum 24 months in closed container. Keep container in a well-ventilated area. Close container after each use. Keep lid tightly closed during storage. Protect from direct sunlight and heat. The applicator should obtain more detailed information from the product label.
 
Health & Safety: Avoid contacts with eyes. Wash hands after use. Please read and observe all precautionary notices on container labels.

DISCLAIMER: The technical data presented in this bulletin are based upon the best available data and practices known to Eagle Paints at the present time. Since Eagle Paints is constantly improving its coatings and paint formulas, future technical data may vary somewhat from what was available when this bulletin was printed. Please contact your Eagle Sales Representative for the most up-to date information. Your feedback is important to us. If you have any comments or suggestions regarding our products and services, please share them with us.

Product for application

• For steel
  • One or 2 coat of eagle primer fast dry or primer antirust or premolac
    
  • 2 coat of elnesr 3000 or golden eagle gloss or polynet gloss or poly net semi gloss and polynet matt
    
• For wood
  
  • 0ne coat of poly net matt
    
  • 2 coat of elnesr 3000 or polynet gloss or polynet semi gloss  or golden eagle gloss and golden eagle matt
    
• For wall
  
  • 2 coat of emultex emulsion
    
  • One coat of polynet matt
    
  • 2 coat of elneser 3000 or polynet gloss or golden eagle gloss and golden eagle matt