Characteristics: A solvent base coating based on silicon resin with aluminum past

Recommended Use: Recommended as coating for metal. Which need high heat resistance

Physical Characteristics

Finish	aluminum
Colour	aluminum
Solid / Volume	45.85%
Density	0.9 ---1 kg/l
Viscosity by cup ford 4	45 sec.
Film Thickness Wet film	50 micron
Thinning	If thinning is necessary, thin up to suitable viscosity using eagle thinner
Recommended Coats	Apply 2 coats to appropriately
Theoretical Coverage	19 – 20  m²/L
Heat resistance	Until  450 centigrade

Surface Preparation: All surfaces to be clean and dray. Remove all grease, oil, wax, or other material by solvent or detergent washing. Remove all loose, flaking or chalking surfaces.

Application Methods: Method: Brush or spray

Drying: Dry time is 2 hours in normal condition .The drying time will be 15 min if the metal heated to 100 degree the dry time will vary with temperature and humidity.

Packing: Pails 15 kg.

Storage & Shelf-life: Minimum 6 months in closed container. Keep container in a well-ventilated area. Close container after each use. Keep lid tightly closed during storage. Protect from direct sunlight and heat. The applicator should obtain more detailed information from the product label.

Health & Safety: Avoid contacts with eyes. Wash hands after use. Please read and observe all precautionary notices on container labels.

DISCLAIMER: The technical data presented in this bulletin are based upon the best available data and practices known to Eagle Paints at the present time. Since Eagle paints is constantly improving its coatings and paint formulas, future technical data may vary somewhat from what was available when this bulletin was printed. Please contact your Eagle Sales Representative for the most up-to date information. Your feedback is important to us. If you have any comments or suggestions regarding our products and services, please share them with us.

Product for application:

• For steel
  
• 2 coat on the steel which need high heat resistance (ovens)