Characteristics: A solvent base clear varnish based on specialized  alkyd modified urethane resin and aliphatic iso cyanide designed to give good adhesion , high resistance to scratch , high gloss and high resistance to environmental condition.

Recommended Use: Recommended as a finish coat varnish Specify on interior and exterior all type of wood work.

Physical Characteristics

Finish	Clear
Colour	transparent
Solid/volume	48.2%
Density	0.91 kg/L
Viscosity by Brookfield viscometer	6 - 7 min
Film Thickness Wet film / dry film	60 micron     /     28.9
Thinning	If thinning is necessary, thin up to a maximum Of 10% white spirit
Recommended Coats	Apply 2 coats to appropriately prepared substrate
Theoretical Coverage	16 mē/L
Gloss @ 60 degree	More than 80degree

Surface Preparation: All the surface of wood to be clean and dry. Remove all grease, oil, wax, or other material by solvent or detergent washing.

Application Methods: Method: Brush, roller or spray gun

Drying: Dry time is approx3-4 hours to be recoated after 12 hours and full cure 72 hours. The dry time will vary with temperature and humidity.

Packing: (Gallon 3.75 litre / Box: 4gallon) - (Can:1litre / Box: 10 cans).

Storage & Shelf-life: Minimum 24 months in closed container. Keep container in a well-ventilated area. Close container after each use. Keep lid tightly closed during storage. Protect from direct sunlight and heat. The applicator should obtain more detailed information from the product label.

Health & Safety: Avoid contacts with eyes. Wash hands after use. Please read and observe all precautionary notices on container labels.

DISCLAIMER: The technical data presented in this bulletin are based upon the best available data and practices known to Eagle Paints at the present time. Since Eagle Paints is constantly improving its coatings and paint formulas, future technical data may vary somewhat from what was available when this bulletin was printed. Please contact your Eagle Sales Representative for the most up-to date information. Your feedback is important to us. If you have any comments or suggestions regarding our products and services, please share them with us.

Product for application

• For wood
  
• 0ne coat of  polyester sealer
  
• 2 coat of flatting varnish or top urethane varnish or polyurethane varnish 2k or top alkyd modified urethane